中国大气田科学开发的内涵

大气田是指天然气探明地质储量超过300×10~8 m~3、天然气峰值年产量在10×10~8 m~3以上且具有一定稳产期的气田。其是中国天然气储产量快速增长和未来长期稳定发展的重要基础,也是保障我国供气安全的关键。通过对国内外260余个大气田开发实践的系统分析和典型气田的解剖模拟,综合研究了大气田科学开发的内涵、核心技术以及全生命周期指标体系。大气田科学开发的内涵包括:①提出以"识别水、控制水、治理水"为技术体系的天然气开发理念,即常规气田"控水开发"、非常规气田人工压裂"注水开发",根据气藏类型和气藏特征,确定合理的采气速度;②综合评价气田开发经济效益和社会效益,保障气田长期稳产;③根据气井生产特征和储层发育特征,选取适用的气田稳产方式;④依据对常规与非常规气藏不同开发阶段的精细描述、气藏开发特征和生产动态的监测,确定气田可采储量、气田水与人工注水开发规律、气田提高采收率技术对策、气田效益稳产期与发展战略。大气田科学开发的核心技术包括:规模优化技术、科学布井技术、均衡开采技术和深度挖潜技术。进而综合优选出产量、压降、采出程度、单位压降产量等多个参数作为评价大气田科学开发的关键指标,建立了高压、低渗透—致密、裂缝—孔隙型和页岩气等4类气藏的全生命周期指标体系。结论认为,该研究成果有助于指导不同类型大气田的科学开发,进一步促进我国天然气产业的快速发展。     

帕金森氏病关联miRNAs的功能和调控

帕金森病（Parkinson's disease, PD）是一种老年期常见的神经系统退行性疾病，致病过程复杂，其发病机制尚未明确，目前普遍认为帕金森病的发生与环境、遗传和年龄等多个因素有关。microRNAs（miRNAs）是一种内源性的小分子非编码RNAs，在转录后水平调控人类基因组中约1/3的基因。大量研究表明，帕金森病与miRNAs存在密切关联，在PD的发生发展、诊断甚至治疗过程中起到重要作用。本综述讨论了最近研究报道的和帕金森病相关的miRNAs，并分析了miRNAs的特异性表达在帕金森病的致病机制和诊断中发挥的作用。     

Catalytic combustion of methane over a highly active and stable NiO/CeO2 catalyst

In the last decades, many reports dealing with technology for the catalytic combustion of methane (CH₄) have been published. Recently, attention has increasingly focused on the synthesis and catalytic activity of nickel oxides. In this paper, a NiO/CeO₂ catalyst with high catalytic performance in methane combustion was synthesized via a facile impregnation method, and its catalytic activity, stability, and water-resistance during CH₄ combustion were investigated. X-ray diffraction, low-temperature N₂ adsorption, thermogravimetric analysis, Fourier transform infrared spectroscopy, hydrogen temperature programmed reduction, methane temperature programmed surface reaction, Raman spectroscopy, electron paramagnetic resonance, and transmission electron microscope characterization of the catalyst were conducted to determine the origin of its high catalytic activity and stability in detail. The incorporation of NiO was found to enhance the concentration of oxygen vacancies, as well as the activity and amount of surface oxygen. As a result, the mobility of bulk oxygen in CeO₂ was increased. The presence of CeO₂ prevented the aggregation of NiO, enhanced reduction by NiO, and provided more oxygen species for the combustion of CH₄. The results of a kinetics study indicated that the reaction order was about 1.07 for CH₄ and about 0.10 for O₂ over the NiO/CeO₂ catalyst.     

青藤碱衍生物的合成及其体外抗炎活性研究

通过计算机辅助系统,模拟青藤碱与蛋白P50活性腔周边对接情况,以盐酸青藤碱为起始化合物,先发生Wohl-Ziegler反应,再通过钯催化的Suzuki偶联反应对其进行修饰,得到12个新型青藤碱衍生物,其结构经~1HNMR、~(19)FNMR、LC-MS等表征;采用报告基因法研究青藤碱衍生物对NF-κB转录活性的影响。12个青藤碱衍生物对NF-κB的转录活性均有一定的抑制作用,且抗炎活性优于青藤碱对照品。对青藤碱A环1位进行修饰可以提高抗炎活性,证明该作用靶点可进行深入探讨研究。     

基于光纤光栅传感的低功耗小型化电网智能感知系统

文章针对监测装置现场取电难的问题,为智能电网盲区和多事态区监测提供解决方案。本研究设计并实现了一种可用于电网智能感知的光纤光栅传感系统,由多参量的光纤光栅传感器和解调仪组成,该解调仪采用可调谐激光器作激发光源,以20×70×90 mm的微型体积,实现2 W的低功耗。系统解调仪最多可容纳4通道光纤光栅传感器,重量小于500 g,分辨率为0.5 pm,精度±2 pm,测量频率可达100 Hz,光信息可通过电力通讯光缆传输,满足多数电网设备监测需求。该传感系统功耗低、体积小,可实现多参量监测,完全满足智能电网现场供电和通讯难、事态多发的监测需求。     

Standing Surface Acoustic Wave (SSAW)‐Based Fluorescence‐Activated Cell Sorter

Microfluidic fluorescence‐activated cell sorters (μFACS) have attracted considerable interest because of their ability to identify and separate cells in inexpensive and biosafe ways. Here a high‐performance μFACS is presented by integrating a standing surface acoustic wave (SSAW)‐based, 3D cell‐focusing unit, an in‐plane fluorescent detection unit, and an SSAW‐based cell‐deflection unit on a single chip. Without using sheath flow or precise flow rate control, the SSAW‐based cell‐focusing technique can focus cells into a single file at a designated position. The tight focusing of cells enables an in‐plane‐integrated optical detection system to accurately distinguish individual cells of interest. In the acoustic‐based cell‐deflection unit, a focused interdigital transducer design is utilized to deflect cells from the focused stream within a minimized area, resulting in a high‐throughput sorting ability. Each unit is experimentally characterized, respectively, and the integrated SSAW‐based FACS is used to sort mammalian cells (HeLa) at different throughputs. A sorting purity of greater than 90% is achieved at a throughput of 2500 events s^?1. The SSAW‐based FACS is efficient, fast, biosafe, biocompatible and has a small footprint, making it a competitive alternative to more expensive, bulkier traditional FACS.     

模糊离散事件系统基于验证器的模式故障诊断

针对模糊系统在运行过程中可能出现由多个事件触发的故障,研究模糊离散事件系统模式故障的诊断问题,提出一种基于验证器的模式故障诊断方法.先对模糊离散事件系统中最常见的模式故障,引入S类型模式故障和T类型模式故障两个概念,再分别对模糊离散事件系统的S类型和T类型模式故障的可诊断性进行形式化.为验证模糊系统模式故障的可诊断性,构造一个验证器自动机,并得到一个关于模糊离散事件系统模式故障可诊断性的充分必要条件,实现对模糊系统模式故障的诊断.     

某船用柴油机排气管路流-固耦合计算与保温效果研究

对某船用柴油机排气管路的流动与传热过程开展流-固耦合仿真分析。结果表明:受排气管路结构影响，管内流动方向和流速发生变化，局部区域产生明显的回流现象；排气管路外表面温度分布差异较大，平均温度高达534 ℃。为达到柴油机安全设计要求，在排气管路外壁敷设保温材料。分析结果表明:气凝胶纳米材料的保温效果优于硅酸铝纤维材料，在相同的运行条件和使用要求下，气凝胶纳米材料的敷设厚度更薄。     

A multi-material part design framework in additive manufacturing

Additive manufacturing (AM) technologies provide more freedom to functional part design in various industries. One of the unique capabilities of AM is that multi-material parts can be produced with material compositional and geometric complexity. Multi-material parts have the advantage of achieving multiple performance requirements. In the research, we propose a framework for designing multi-material parts using AM processes. The proposed framework is composed of four interacting modules, including design requirement identification, primary material selection, AM process selection, material composition, and part geometry determination. Rules and guidelines for AM are integrated into the proposed framework with AM processes’ capabilities and constraints compiled in databases. We also introduce databases to assist in decision-making and ensure manufacturability of the designed multi-material part in various product design phases. The proposed framework is applied to a case study involving a conceptual design of a multi-material battery pack cooling plate.